Log and Timber Defense is a new technology semi-transparent wood stain that provides the ease of application and penetration of the older solvent oils with the performance and longevity of a penetrating polymer based finish. This combination is truly unique.
Log and Timber Defense penetrates into the wood like an oil coating, but unlike oils, it hardens into a lattice, supporting and strengthening the natural wood fibers to protect the wood from the inside out.
Ideal for sprucing up existing homes with oil finishes or a lasting durable finish for new construction.
- Allows texture and grain to show through
- Unique Trans-Oxide pigments provide long-lasting beauty
- Low odor and VOC
- Outstanding adhesion and durability
- No peeling or flaking
- Great coverage rate
- Soap and water clean-up
- Environmentally friendly
Your rustic wood and barn wood will look beautiful with Log and Timber Defense stain.
Log and Timber Defense comes in 1 Gallon and 5 Gallon pails to easily complete any size of project. Color samples are available.
Product Information
Features
- Excellent UV protection
- Long lasting color retention
- Breathable film allows wood surfaces to dry out
Resource Links
Application Temperature
40° to 95°F
Application Methods
- Airless sprayer
- Brush, Roller, Application Pads
- Back-brush into surface
- Refer to product label for application instructions
Surface Preparation
- Clean and dry
- Free of mold and mildew
- Never use steel wool
Special Instructions
- Back-brushing required
- Stir container every 15 minutes
- Maintain a wet edge to avoid lap marks
- Avoid applying in direct sun
- Apply first coat liberally to the point of saturation with a follow-up coat before the first coat dries
Shelf Life
1 Year
Frequency
As needed, depending on exposure
Drying Time
- Dry to the touch in 45 minutes
Coverage Rate
- 175-250 square feet / gallon (varies by substrate condition)
The newest addition to the Perma-Chink System of finishes, Log & Timber Defense offers a penetrating finish similar to oil-based finishes. Read more
Deck / Log & Timber Defense FAQ
How Do I Apply Deck Defense?
Applying Deck Defense is very easy, and many methods or “tools” can be used. On surfaces such as decking or fencing, a low-pressure pump-up sprayer is the most economical. Learn more here.
What are the maintenance guidelines?
Good maintenance for decks, as well as other wood surfaces, will prolong the need for re-staining or removal. Deck Defense will not flake or peel when properly applied, so a general cleaning should be done every year with Log Wash. Maintenance requirements will vary with exposure and environmental conditions, and heavy traffic. Expect to see wear in high traffic areas such as steps and traffic patterns first. This does not mean protection is gone, but indicates for appearance purposes that it’s time for a light re-coat.
How should the surface be prepped?
First and foremost; the surface needs to be clean and dry. New treated wood needs to “season” prior to application. This process will vary with temperature and humidity and actual moisture content of the new wood. On older wood, a thorough cleaning with Wood Renew will help to restore the color of the wood and remove stains and dirt. Make sure to adequately rinse with water and check the pH of the run-off water to make sure all the surfaces have been rinsed well. The Ph of run-off water should be around 6.5 to 7.5 (depending on the pH of the water source). Make sure to check fasteners and the condition of wood prior to cleaning and replace any decayed or unstable wood.
Tips on applying Log & Timber Defense?
Log & Timber Defense is applied like our Lifeline stains, including the backbrushing step. Stir the container every 15 minutes with a paint stick to ensure an even color. Apply the finish in small sections to maintain a wet edge, avoiding lap marks. This prevents lap marks and large sections from looking uneven.
