Deck Defense is the best wood stain for your decks, rails and fences. It has been engineered for better performance, longer life, and easier application. Although it is a totally waterborne product, Deck Defense has penetrating properties like oil finishes, but unlike oil-based products, it hardens into a lattice-like coating, supporting and strengthening the natural wood fibers from the inside out.
Customers can feel secure in the knowledge that their investment is protected from the natural damaging effects of sun, wind, and water. Deck Defense is easy to apply and maintain, and is ideal for coating decks, fences, railings and other horizontal surfaces. Our deck stain is available in seven standard colors to complement our exterior wall finishes and custom colors to match home colors.
Deck Defense can be applied over older Deck Defense-stained decking provided proper application and surface preparation.
Questions? Read our Deck Defense FAQs here.
Deck Defense comes in 1 Gallon and 5 Gallon pails to easily complete any size of project. Color samples are available.
Product Information
Features
- Excellent UV protection
- Long lasting color retention
- Breathable film allows decking to dry out
Resource Links
Application Temperature
40° to 90°F
Application Methods
- Airless sprayer
- Brush, Roller, Application Pads
- Back-brush into surface
- Refer to product label for application instructions
Surface Preparation
- Clean and dry
- Free of mold and mildew
- Never use steel wool
Special Instructions
- Back-brushing required
- Stir container every 15 minutes
- Maintain a wet edge to avoid lap marks
- Avoid applying in direct sun
- If desired, apply second coat while first coat is still wet
Shelf Life
1 Year
Frequency
As needed, depending on exposure
Drying Time
- Dry to the touch in 15 minutes; tack-free in 30 minutes
- Wait 24 hours before returning heavy items
Coverage Rate
- 175-250 square feet / gallon
Deck Defense offers superior protection for decks, fencing and railings. Easy to apply and long lasting.
Deck / Log & Timber Defense FAQ
How Do I Apply Deck Defense?
Applying Deck Defense is very easy, and many methods or “tools” can be used. On surfaces such as decking or fencing, a low-pressure pump-up sprayer is the most economical. Learn more here.
What are the maintenance guidelines?
Good maintenance for decks, as well as other wood surfaces, will prolong the need for re-staining or removal. Deck Defense will not flake or peel when properly applied, so a general cleaning should be done every year with Log Wash. Maintenance requirements will vary with exposure and environmental conditions, and heavy traffic. Expect to see wear in high traffic areas such as steps and traffic patterns first. This does not mean protection is gone, but indicates for appearance purposes that it’s time for a light re-coat.
How should the surface be prepped?
First and foremost; the surface needs to be clean and dry. New treated wood needs to “season” prior to application. This process will vary with temperature and humidity and actual moisture content of the new wood. On older wood, a thorough cleaning with Wood Renew will help to restore the color of the wood and remove stains and dirt. Make sure to adequately rinse with water and check the pH of the run-off water to make sure all the surfaces have been rinsed well. The Ph of run-off water should be around 6.5 to 7.5 (depending on the pH of the water source). Make sure to check fasteners and the condition of wood prior to cleaning and replace any decayed or unstable wood.
Tips on applying Log & Timber Defense?
Log & Timber Defense is applied like our Lifeline stains, including the backbrushing step. Stir the container every 15 minutes with a paint stick to ensure an even color. Apply the finish in small sections to maintain a wet edge, avoiding lap marks. This prevents lap marks and large sections from looking uneven.
